詳細介紹
GHL高速濕法混合制粒機- GHL高速濕法混合制粒機
GHL High Speed Mixing And Granulating Machine
特點:
★ 本機采用臥室圓筒(錐形)構造关斜,結構合理。
★ 充氣密封驅動軸铺浇,清洗時可切換成水痢畜。
★ 流態化造粒,成粒近似球形祷消,流動性好轴及。
★ 較傳統工藝減少25%粘合劑,干燥時間縮短。
★ 每批次僅干混2分鐘塑渤,造粒1-4分鐘巢的,工效比傳統工藝提高4-5倍。
★ 在同一封閉容器內完成饱舆,干混一濕混一制粒嘴符,工藝縮減,符合GMP規范稻蒂。
★ 整個操作具有嚴格的安全保護措施蒿荤。
Features:
★ The machine adapts horizontal cylinder structure.Its sstructures is reasonable;
★ Use air filled seal shaft to drive.When washing,it can be changed to water;
★ Use fluidization to Granulate and the granule is near ball.Its flow is good;
★ Compared the traditional process,25%of adhesive can be reduced and the daying time can be shorted;
★ The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes.Compared with the traditional process,4-5 times of efficiency is raised;
★ In the same sealed c ontainer,dry mixing,humidity mixing and granulating can be finished.It is in conformity with the reauirements of GMP;
★ The whole operation has strict safe and protective measures.
工作原理:
★ 物體物料與粘合劑在圓筒(錐形)形容器中由底部混合槳充分混合成濕潤軟材,然后由側置的高速粉碎槳切割成均勻的濕顆粒秒牙。
Working Principle:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material.
Then it is cut through hi8gh-speed crusher and become uniform granules.
GHL High Speed Mixing And Granulating Machine
特點:
★ 本機采用臥室圓筒(錐形)構造关斜,結構合理。
★ 充氣密封驅動軸铺浇,清洗時可切換成水痢畜。
★ 流態化造粒,成粒近似球形祷消,流動性好轴及。
★ 較傳統工藝減少25%粘合劑,干燥時間縮短。
★ 每批次僅干混2分鐘塑渤,造粒1-4分鐘巢的,工效比傳統工藝提高4-5倍。
★ 在同一封閉容器內完成饱舆,干混一濕混一制粒嘴符,工藝縮減,符合GMP規范稻蒂。
★ 整個操作具有嚴格的安全保護措施蒿荤。
Features:
★ The machine adapts horizontal cylinder structure.Its sstructures is reasonable;
★ Use air filled seal shaft to drive.When washing,it can be changed to water;
★ Use fluidization to Granulate and the granule is near ball.Its flow is good;
★ Compared the traditional process,25%of adhesive can be reduced and the daying time can be shorted;
★ The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes.Compared with the traditional process,4-5 times of efficiency is raised;
★ In the same sealed c ontainer,dry mixing,humidity mixing and granulating can be finished.It is in conformity with the reauirements of GMP;
★ The whole operation has strict safe and protective measures.
工作原理:
★ 物體物料與粘合劑在圓筒(錐形)形容器中由底部混合槳充分混合成濕潤軟材,然后由側置的高速粉碎槳切割成均勻的濕顆粒秒牙。
Working Principle:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft material.
Then it is cut through hi8gh-speed crusher and become uniform granules.