強制循環蒸發結晶器

一、概 述：

強制循環蒸發結晶器又稱FC( Forced Circulation ）型結晶器犀呼，是一種可以連續生產的通用型結晶設備幸撕，廣泛應用于化工、輕工外臂、醫藥等行業的生產以及環保行業廢水蒸發結晶處理坐儿。根據料液性質的不同，F(xiàn)C型結晶器分為加熱蒸發型宋光、間壁冷卻型或真空冷卻型等以滿足各種結晶工藝的需要貌矿。

強制循環蒸發結晶器是由加熱器對待處理的料液進行加熱進入結晶分離室蒸發分離，溶液達到過飽和狀態便產生結晶現象罪佳，由強制循環泵經多次循環加熱后結晶室內過飽和溶液沉浸在懸浮晶粒表面上逛漫，使晶體逐漸長大，當晶體數量達到一定濃度時即可將晶漿排出另作處理锉择。強制循環蒸發結晶器具有生產能力大土霞，產品的粒度分布較寬，約在0.8~4mm 的范圍沟脓，適應各種物料的結晶等特點每访。

二、結構組成：

強制循環蒸發結晶器主要由換熱器咨捕、結晶分離室闰收、冷凝器、循環管础川、循環泵淀税、晶漿泵、真空泵韵绿、控制系統等組成狂篇；按物料濃度高低與生產能力的大小不同，可分為一效赁栈、二效岗屏、三效、四效強制循環蒸發器漱办。

三这刷、設備規格：

四咐刨、設備圖片：

Forced Type Circulation Evaporation Crystallizer

I. Introduction

Forced Circulation Evaporation Crystallizer is a kind of continuous crystallizer with crystal slurry circulation. On production, raw solution feed from bottom of circulation pipeline,and then mixed with crystal slurry which left from bottom of crystallizer, the mixed fluid will be pumped into the heat exchanger,it will increase temperature in the heater (normal increase 2-6℃),but it will not evaporation. Once hot crystal slurry flow into crystallization chamber,after boiling, it will reached super saturation,so parts of solute sedimentate on the surface of suspended crystal, and then grow bigger,finally discharge out from the top of circulation tubes. FC Crystallizer have large production capacity, but product size dimension arranged widely.

II. Structure Component

Forced Circulation Crystallizer consist of Crystallization Chamber, circulation tubes, circulation pump and heat exchanger etc.

Crystallization Chamber designed with cone type bottom,crystal slurry discharge out from the cone bottom,pumped into the heat exchanger by Axial Flow pump through circulation tubes,after heating or cooling,re-back into the crystallization chamber,it will continue having such circulation running.that’s the reason it called crysta-slurry circulation type.crystal slurry discharge let is near the bottom of crystallization chamber,and feed let is lower then discharge level.

III. Usage

Forced Circulation Evaporation Crystallizer widely used in the industry of chemical, light industry,pharmacy etc, for product manufacturing and waste water treatment. FC type Crystallizer could work for evaporation crystallization, batch cooling crystallization or vacuum cooling crystallization. Product size dimension during the range of 0.8-4mm.